TELECOMMUNICATIONS HARDWARE
Flat fitting with caster.
10070
Clamp-type tension fitting, hot-dip galvanized, size No. 8 and No. 10
Curved tension fitting, hot-dip galvanized.
Single “D” type tension fittings, hot dip galvanized
“D” type tension fittings for double strapping, hot-dip galvanized.
“D” type tension fittings for double 1” strapping, hot-dip galvanized.
“D” type tension fittings for double strapping without special tube, hot-dip galvanized.
Crossing hardware, hot-dip galvanized.
Single cross fittings, hot-dip galvanized.
Tangent fitting for double strapping, hot-dip galvanized.
Medium tangent fitting with slot, hot-dip galvanized
45° fitting, hot-dip galvanized
Short bracket for 3“ 1/2“ tap, made of aluminum.
Long bracket for L.E. 12", made of aluminum.
“J” type gathering wire staple with 5/16“ x 1 1/2“ stud, hot-dip galvanized.
Mini “J” type wire binding clip with 5/16” x 1” stud, hot-dip galvanized.
Aluminum profile clip and 2" hex screw.
Clamp with female and male aluminum profile with 1" screw with carriage and square nut
Extension fitting for 8 x 60 cm and 8 x 100 cm crosshead channel tension. Hot-dip galvanized.
3/8” and 1/4” Thimbles. Hot-dip galvanized.
Hot-dip galvanized and neoprene rubber "J" fitting for ADSS cable with two holes.
Violin-type hardware, hot-dip galvanized.
Hot-dip galvanized anchor with deadbolt for retaining.
Crosshead hardware for storing ADSS cables.
Coil of 18-gauge galvanized wire, approximately 250 linear meters.
1" 12" GE concrete staple with nail for RG-6 coaxial cable, in black and white (bag with 100 pieces).
3/4” 14” GE concrete staple with nail for telephone and fiber optic cables, in black and white (bag with 100 pieces).
40, 60, and 100 cm extension hardware with reinforcement and double tangent, hot-dip galvanized.
40, 60 and 100 cm extension fittings with special pear reinforcement without tube, hot-dip galvanized.
40, 60 and 100 cm extension fittings with reinforcement and special bulb without tube, hot-dip galvanized.
40, 60, and 100 cm extension hardware with reinforcement and "pear-shaped" hardware, hot-dip galvanized.
40, 60 and 100 cm extension fitting with reinforcement and “J” type fitting tip for ADSS fiber, hot-dip galvanized.
Box with 100 pieces of 5/8” stainless steel buckle.
5/8" stainless steel strapping, 30.5 m (presented in a plastic roll holder).
Spider connector
MOD. K1.
Burndy connector
KSU22.
KGP connector for rod.
KS22 connector, for ground
1/2” thin-wall galvanized conduit.
5/8" stainless steel strapping, 30.5 m (presented on a plastic roll holder).
3/4" stainless steel strapping, 30.5 m (presented in a plastic roll holder).
Light-duty strapping machine, mod. C00169, mod. C00169.
Heavy-duty strapping machine, mod. C00369.
